- SICK
- Opto-electronic Protective Devices
- Encoders
- Detection and Ranging Solutions
- Distance sensors
- Level sensors
- Localization and Positioning Solutions
- Photoelectric sensors
- Proximity sensors
- Registration Sensors
- Magnetic Cylinder Sensors
- Safety Switches
- Accessories
- Automation light grids
- Indentification solutions
- Motor Feedback Systems
- Vision
- View All
- Qlight Signal & Warning Light
- Canon Cable ID printer
- I-bon
- I - Wire
- Schneider
- Velledq
- Meanwell Power Supply
- Others
- PHILIPS
- Others
Sensorik Automation Sdn Bhd
22, Jalan Shahbandar 2, Taman Ungku Tun Aminah, 81300 Iskandar Puteri, Johor, Malaysia.
+6016-7725628
MK2600 Canon ID Printer
| Previous | 2 / 12 | Next |
Canon ID Printer Mk2600
High productivity with 0.01% stops fine pitch adjustment
The Mk2600 prints precise characters of up to 300 dpi for tubes, labels, strip and more. With a large LCD display and automatic full and half-cutting, it offers smooth and easy printing from start to finish.
- Full/Half Automatic Cut
- High speed and fast output rate up to 40 mm/sec.
- Various print patterns
Card & Label Specification
|
Printing Method |
Thermal Transfer |
|
Resolution |
up to 300 dpi |
|
Printing Speed |
|
|
Tube |
High Speed: 40 mm/s*1 |
|
Label |
High Speed: 40 mm/s |
|
Output Rate*2 |
High Speed: About 42 pcs/min |
|
Ink Ribbons |
|
|
Ribbon Cassette |
Black: 100 m |
|
Character Sizes |
1.3 mm (only full-width available), |
|
Input Modes |
Alphanumeric, Symbol input |
|
Display |
LCD Graphic (160 x 64 dots) with backlight |
|
Display Capacity |
10 characters/line x 2 lines (full-width) or |
|
Built-In Memory |
|
|
Print Data |
Approx. 5,000 characters |
|
Files |
Approx. 60,000 characters or |
|
Media Cutting Function |
Automatic full-cutting, Automatic half-cutting |
|
Power Supply |
AC Adaptor |
|
PC Interface |
Hi-Speed USB 2.0, PC Connection Kit (included) |
|
Operating Environment |
|
|
Temperature |
15 - 32.5°C |
|
Humidity |
10 - 85% RH (with no condensation) |
|
Storage Environment |
|
|
Temperature |
5 - 35°C |
|
Humidity |
10 - 90% RH (with no condensation) |
|
Dimension (W x D x H) (approx.) |
250 x 300 x 85 mm |
|
Weight (Printer only) (approx.) |
2 kg |
Print Media
|
Tube |
|
|
Type |
PVC Tube*3 with Tube attachment |
|
Size |
ø 2.5 - 5.2 mm, 0.5 mm thick |
|
Heat Shrink Tube |
|
|
Type |
Heat Shrink Tube*4 with Tube attachment |
|
Size |
2:1 shrinkage: ø3.2 - 6.4 mm |
|
Label Tape |
|
|
Type |
Tape Cassettes (White, Yellow, Silver) |
|
Width |
6 mm, 9 mm, 12 mm |
|
Length |
White, Yellow: 30 m |
|
Segment Length |
Can be set from 2 to 150 mm*5 |
|
Wrap Around Tape |
|
|
Type |
Tape cassette (8 m) or Commercially available reel with optional Wrap Around Tape Guide |
|
Colour |
Print area only: White |
|
Size |
Take-up length: 8 m |
|
Segment Length |
6 - 150 mm (depends on cut setting) |
|
Plate |
|
|
Specified Thickness |
0.5 mm*6 with optional Plate attachment |
|
Width |
8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm |
|
4 mm ID Strip |
|
|
Type |
4mm ID strip cassette (white) |
|
Size |
Width: 4 mm |
|
Segment Length |
Can be set from 8 to 150 mm |
- When optional Tube Warmer is used, the maximum printing speed is 25 mm/s.
- Printing 20 mm tubes, 5 full-size characters, consecutive print mode, half-cutting.
- Before using a tube, be sure to check whether characters can be print on it.
- Before using a tube, be sure to check whether characters can be print on it. Heat Shrink Tube cannot be used with optional Tube Warmer.
- If 1.3 mm full-width or 2 mm half-width character is selected for segment length of less than 3 mm, text might be printed crossing over the cutting line.
- Plates of other thickness should be tested before printing. Manual cut only.