KTS-MB81141142ZZZZ Contrast Sensors SICK | Sensorik Automation SB Supplier, Distributor, Dealer, Wholesaler SICK Registration Sensors ~ Sensorik Automation Sdn Bhd

Sensorik Automation Sdn Bhd
22, Jalan Shahbandar 2, Taman Ungku Tun Aminah, 81300 Iskandar Puteri, Johor, Malaysia.

+607-5546088
+6016-7725628

KTS-MB81141142ZZZZ Contrast Sensors SICK | Sensorik Automation SB

23 / 33

Quantity

Add Quotation

KTS-MB81141142ZZZZ | Part no.: 1078119

Contrast sensors |

KTS Core

Features

Special applications	Standard
Device type	Standard
Dimensions (W x H x D)	26 mm x 62 mm x 47.5 mm
Sensing distance	13 mm
Sensing distance tolerance	± 3 mm
Housing design (light emission)	Rectangular
Light source	LED, White 1)
Wave length	400 nm ... 750 nm
Light emission	Long side of housing
Light spot size	1.2 mm x 3.9 mm
Light spot direction	Vertical 2)
Receiving filters	None
Teach-in mode	2-point teach-in, teach-in dynamic
Output function	Light/dark switching
Delay time	-
Special features	-
Delivery status	2-point teach-in
Parameter presettings	None

Mechanics/electronics

Supply voltage	10.8 V DC ... 28.8 V DC 1)
Ripple	≤ 5 Vpp 2)
Current consumption	< 100 mA 3)
Switching frequency	25 kHz 4)
Response time	20 µs 5)
Jitter	10 µs
Switching output	Push-pull: PNP/NPN
Switching output (voltage)	Push/Pull: HIGH = VS - 3 V / LOW ≤ 3 V
Output current Imax.	100 mA 6)
Input, teach-in (ET)	Teach: U = 10 V ... < VS
Input, blanking input (AT)	Blanked: U = 10 V ... < Uv
Input, fine/coarse (F/C)	Coarse: U = 10 V ... < Uv
Input, light/dark (L/D)	Light: U = 10 V ... < Uv
Retention time (ET)	35 ms, non-volatile memory
Connection type	Male connector M12, 4-pin
Protection class	III
Circuit protection	UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression
Enclosure rating	IP67
Weight	68 g
Housing material	Plastic, VISTAL®
Optics material	Plastic, COP

1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) With light/dark ratio 1:1.
5) Signal transit time with resistive load.
6) Total current of all Outputs.

Dimensional drawing KTS Core

Adjustments KTS Core

Connection diagram Cd-380

KTS Core - setting of switching threshold (teach-in dynamic)

KTS Core - setting the switching threshold (2-point teach-in)

Sensing distance KTS Core

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Ship to Name
Shipping Address
Messages*